ratchet straps for quad atv and jet ski
Duration : 0:1:5
Posts Tagged ‘bike’
Straps can Twist fork clamps. AMA Pro racer Dillon Atkins #911 shows you THE best way to transport your motorcycle in/on a trailer, Pit Bull Trailer Restraints. He will tell you about them, show you how to install them to the trailer, install it on the bike and how to hook them together and then just how strong and sturdy it holds your bike.
In Video: Dillon Atkins 911, Darin Atkins(dad), Calon Steinke (brother), Video by Joni Atkins (mom). Special thanks to Lenny Albin for his expert advise on how damaging OTHER forms of restraints on your forks.
Duration : 0:3:59
The Quadster HPV is a home-built human-powered vehicle, inspired by the “horseless carriage” of days gone by. It is designed for practicality and comfort, though it is capable of surprising speed. It is light weight for a two-seater, under 35 kg (~75 lb), stable and easily maneuvered – a fun alternative for pleasure and short trips.
Both riders have 21 speeds, independently controlled and paced. The pilot handles the under-seat steering and brakes. It’s just the right width for trails and bike lanes, under 1200mm (47 in.) wide.
The frame is steel, all components are premium and commonly available: Sugino short-stroke 152mm crankset, Avid BB7 brakes, Shimano Ultima bar-end shifters, derailleurs and freewheels, Velocity Dyad 700C rear and 20-inch front wheels, and more. To tame the elements, fairings and fenders can be added.
Duration : 0:3:2
http://www.etrailer.com/tv-assembly_boone_dock_storage_stand_BH91411.aspx
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a device that holds ball mounts, bicycle racks, and cargo carriers on your wall for easy storage. These are the parts we have here, it does need a little bit of assembly, so we’ll show you how it goes together. As you can see we already put the covers on the end of the tubes, they just pop on and you tap them into place no big deal. You do have to take note of what side these bars go on the main support bar, there are angles you have to match up to. It goes in like that and when you know what the general layout is then we can install the hardware. Now you get some common hand tools and tighten them down. In this case a 1/2 inch wrench and 1/2 inch socket. Once you have it assembled, you’ll notice that the angle is towards the wall. This will be the wall mount right here, it gets lag-bolted into place and this part just sits on the floor and bears the weight. You have to have this angle so it puts the weight straight down. You see we have this leaning against the wall here, it stands out away from the wall so it takes all the support weight. What happens next is you install the screws that will hold it against the studs of your wall. Depending on the situation with the wall you have, what’s really nice is that the studs on the inside holes will match 16 inch stud centers. The outside holes measure to 18 inches. The kit comes with four lag bolts to mount on the wall to your garage. Now we’ll show you how to install the dock block, the device that will actually hold your accessory. There’s two positions you can choose from here or the lower one. We’ll choose the middle one here, this part simply slides into place and the pin goes through it. It’s kind of hard to see, but if you can tell there are grooves in the pin that allow you to insert a C-clip. There’s one on each side which will keep the pin from moving side to side. They simply just go over the groove, be careful because they fly and gently push them over. That’s the assembly for BH91411, from Boone outdoor hardware, the Boone Dock.
Duration : 0:2:55
http://www.etrailer.com/tv-demo_thule_insta_gator_bike_rack_TH501.aspx
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
These easily installed single bike carrier allows for secure bikes wherever you go. With its rugged steel construction and powdered coating this bike rack is ready for any conditions you can put it through. It’s easy front wheel clamping makes travel a breeze, and this will virtually work on any bicycle. First off we’ll open our truck bed here, set inside our Insta-Gater, and there’s a couple things to do first and we’ll show you. First we need to lengthen the straps and we’ll do that by pressing down on the center button and pulling them out. Now these straps here fit in between the tailgate and the bed of the truck. What happens is we close the tailgate and it traps them inside. That way the rack won’t go anywhere. Now that we have the straps inside we need to tighten everything down, and this nice handy little ratchet will do that for us.
To install our bike we take the front wheel and we set it inside the rack and make sure it’s hitting inside the tail gate. Then we take our locking arm here, give it a squeeze and let it come back. Now we make sure it goes over the tire, and once it makes contact we want to make sure it goes two clicks past it. Once you have it in there, give it a little shake and make sure it’s stable and it might need one more click or two. Maybe with the front suspension bikes it might take more tension to keep it from wobbling. As you can see I’m shaking the bike and truck so this isn’t going anywhere. To release this bike all you have to do is push this trigger here, maybe push on it a little more to relieve the tension and then we take our bike right off. As you can see here, there’s a space to add a lock to it. This is part of Thule’s one key system. So say for example you have another Thule system that utilizes the one key system, you can buy a matching cylinder to install on this bike rack and lock everything into place. The Thule Insta-Gator bike rack as you can see will fit virtually any kind of bike frame. It quickly installs in the bed of your truck and with a little practice you could probably have this installed in 15 seconds. With its durable steel construction and painted finish will last for a very long time. As you can see we have it installed in the middle here and obviously you can put two of them in there and possibly four depending on the width of your truck. Also on the tire sizes with this bike you can fit mainly from 20 inches to 29 inches and tire width of about 3 inches. There you have it for part # TH501 from Thule, the Insta-Gater truck bed bike carrier.
Duration : 0:2:43
Over the years, we’ve seen people tie down their motorcycles in the craziest ways imaginable using tie-down straps that looked like relics from Great Depression. We decided to take some time and dedicate it to the proper way to tie-down and load a motorcycle into a truck or a trailer including the importance of using the correct tie-down strap.
Duration : 0:6:8
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to show you the Softride Shuttle Pad tailgate carrier, part number SR26457. The Shuttle Pad is an easy and inexpensive way to carry up to 6 bikes in the bed of your truck. The heavy duty vinyl cover sits over the tailgate of your truck. Four straps run underneath the tailgate and secure the pad. Along the top of the pad are nylon hoops and velcro straps that you can use to attach your bikes. The front wheel of the bike will hang over the tailgate and rest against the pad. There is a built in velcro flap that will allow access to the tailgate release handle. 0:35
Duration : 0:3:7
http://www.ampli.com/s312.htm
http://blog.ampli.com/
http://www.facebook.com/AmplivoxPortableSoundSystems#!/pages/Amplivox-Portable-Sound-Systems-Lecterns/93731130740
http://twitter.com/Amplivox
Take your message on the road with the Sound Cruiser Car PA System the best in Battery Powered Car Audio PA Systems. This horn pa system mounts to the roof of your car, truck or any vehicle with straps and suction cups.
– DC Adapter Plugs into car cigarette lighter or attaches to any battery.
– Great for Parades, Fire and Rescue, EMS, & Police!
– Installed on cars, trucks, construction equipment, firing ranges, golf carts, camp buildings, boats & more!
50 Watts / Audiences of 3,000 Room Size 30,000 Sq. Ft.
- 6 Year Limited Warranty & Made in USA -
Sound Cruiser Car PA System
– Suction Cup Mount for easy installation of vehicles of all types!
– Weather resistant design great for cold, heat, rain or snow
– Half Mile Range! Be heard clearly up to nearly 9 football fields away!
– Be heard in 180° (S312) or 360° (314) radius!!
If you need to be heard from a vehicle this Car PA System is the perfect choice. It’s the only battery powered car audio PA system with a half mile range and wireless microphones. Mounts to nearly any vehicle in seconds with suction cups and straps.
Keywords: Amplivox Sound Cruiser Car PA System Battery Powered Audio megaphone bullhorn Parade Fire and Rescue EMS Police mounted speakers loud loudspeakers water resistant proof durable outdoor indoor car truck boat bulldozer suction cup strap bike rack portable systems auto vehicle public address iphone how to set up install howto diy build an audio system “high speed” “mix tape” siren bullhorn
Duration : 0:1:30
The tie down strap sack installs to your existing tie downs, ratchet straps, cam straps, canoe tie downs, etc.. in seconds. There is no need to purchase additional tie down. When the Strap Sack is used with your tie downs, it holds all of the excess strapping and covers the ratchet. There is no need for additional tying of the strap. The Strap Sack prevents tying, flapping and, dragging of the excess strapping or tail of the tie down strap. After use, the Strap Sack stores all of the excess Tie Down Strapping preventing tangling with other tie downs, bungees, or rope. The Strap Sack is available in for tie down from 1″ to 2″ widths. We also have several colors and different quality materials for different types of applications. Some common applications for our product is as follows: canoe tie downs, kayak straps, trailer ratchet straps, atv tie down straps, snowmobile tie downs, motorcycles soft ties, and misc. use of tie down straps for homeowners and other industries.
Duration : 0:1:30
How to secure a bicycle in a pickup truck bed with tie-down straps. Sold by http://www.SlikFit.com as a Do-It-Yourself pickup bike rack. For a true, locking pickup bike rack, check out the JourneyMan at http://www.slikfit.com/servlet/the-2/truck-bike-rack%2C-truck/Detail
Duration : 0:1:23