Archive for January 2011

Hey everyone. I am buying square crossbar roof racks for my car, and I am planning to attach a thule cargo unit to the top. Will a thule unit be able to be latched to these square bars? (Thule brand crossbars are upwards of 350 bucks, completely not an option for me.

Thanks!

Most Thule roof accessories, like a cargo basket or box, are designed to fit a wide variety of crossbars including the square bars that Thule makes, round crossbars from Yakima, and most of the oval shaped factory crossbars.

Thule usually provides information regarding the clamps or mounts for their accessories. Check to see what the maximum crossbar size the clamps or mounts on your particular accessory will accommodate.

is there any situation that u may be tied or strapped down when you go to the dentist?or has anyone ever had it done to them

thanks

x

My brother went to a kid’s dentist where he was strapped AND held down because he wouldn’t sit still, and they WILL do it for older people if they have to, but it’s not routine, only if they are freaking out, and they will usually send you to a special surgeon and sedate you in that circumstance. It DOES happen but they won’t strap you down against your will or anything.
Similar situation.. I had to be strapped down to get blood taken when I was about 9… Both arms and legs!

anybody found any good prices for a relocation kit for this truck? I need the straps,sending unit and tank itself.
thanks in advance

www.67-72chevytrucks.com

That is the largest 67-72 chevy truck message board on the web. Not trying to run you away from here, but it is usually easier to get the info you want from a large group of enthusiast for the same type vehicle.

Mei Tai carriers were first seen in Asia hundreds of years ago when women would wrap their babies up in a large scrap of cloth and then wrap them around their bodies to carry them around while they did their housework or shopping or daily chores.

Today, the Mei Tai, which is pronounced may tie, is popular all over the globe. The Mei Tai carrier is a square or rectangular piece of quilted cloth with strips of cloth coming from all four corners of the square. These strips of cloth are what is wrapped around your body to keep the baby snug up against you so she or he doesn’t fall to the ground. The square of cloth is where the baby sits. It’s very versatile and can be used for newborns, infants, and even up to the toddler years.

You can wear the Mei Tai carriers on your front or on your back and the baby is safe and secure up against you while you shop, work around the house or go for a walk. Moms and dad’s can each wear the Mei Tai carriers with the baby and be comfortable with it. They come in a variety of colors and many styles use black for the straps and the outline of the rectangular quilted section, which helps complement almost anything you are wearing.

When you first receive your Mei Tai carrier, you might be a little intimidated about how to put it on, but with a little practice, you will become an expert at placing the baby just right and tying the knots where they need to be to safely and securely carry your baby.

To wear your baby in front, start by tying the Mei Tai carrier, with the pattern side down, around your waist as if you were tying on an apron. Then you pick up your baby and hold him or her in front of you and bring the Mei Tai carrier up from your legs, snug around the baby and up over both of your shoulders. These will be the long straps that are going over both of your shoulders. Cross the two large straps in the back to make a large X and bring each of them back to the front of your body under your arms and tie them securely in a knot or a bow. And there you have it; baby will stay securely nestled in front of you until you are ready to remove them.

If you want to carry the baby on your back, it’s a little trickier to do, but with a lot of practice, you can get it done without any help. The easiest way to start is to set the Mei Tai carrier on the couch or living room style chair, spreading out all four straps. Next you place the baby on top of the square and fold some of it up, over baby’s legs. The bottom strap should now be across the tummy. Then you sit in front of the baby with your back towards him or her and wrap the baby’s legs around your waist. You will then take the bottom two straps and tie them tightly around your waist and then pull the two larger straps up over the baby and your shoulder while you stand up, taking the baby with you. Cross the big straps in front of you, then again in back of you and bring them around to the front one more time and tie or knot them to securely tie the baby to your back. You are now ready to go!

For a little piece of history with a lot of style and versatility, the Mei Tai carriers cannot be outdone. You will enjoy the style and convenience and ease of use of Mei Tai carriers and so will your little one.

David Cummings

When you first drove your jeep, for sure you were amazed with the perfect condition of its parts and accessories. That could also be the reason why you purchased it in the first place.

However, though you exert so much effort in maintaining the jeep parts and accessories at the top of their shape, there will come a time that their service will end. There is no need to blame yourself, it is inevitable.

There are no such perfect jeep parts and accessories that could stand the test of time. There are only top of the line ones that guarantee a longer rate of service. Therefore, you will be given no other choice but to purchase replacements for these the moment they fail.

There is no more point in worrying about the replacement thing as available aftermarket jeep parts and accessories are at par to those original ones installed in it. Name whatever part or accessory you need, the auto market has it. From parts like body lifts, bumpers, shocks, tops, track bars, winches, wheels, tires, fender flares, air intake and so much more to accessories like floor mats, cargo nets, roll bar grips, and more, the list seems to be unending.

Not only are these products available for your replacement needs but the jeep parts could upgrade the performance of your jeep. With that, your jeep would never be the same as any other jeeps on the road in terms of the quality of service it gives to the owners.

On the other hand, the jeep accessories are for you to choose in order for you to convert your jeep into a unique one. Of course, it would be such pride for you to own a one of a kind jeep.

With the benefits being offered by the jeep parts and accessories, would you believe that those are not yet all of it? Yes. The jeep parts and accessories could also give you a desired comfort and a deserved safety inside your jeep. Therefore, you should not let low-quality parts and accessories be installed in your jeep.

With that, you should be keen enough in choosing the right ones. Do not be fooled by any auto parts dealers. For sure, the wrong jeep parts and accessories would ruin your beloved jeep.

Kay Zetkin

0 MUSE tribute/CARGO bar Moscowcargobarmoscowhttp://gdata.youtube.com/feeds/api/users/cargobarmoscowMusicMUSE, tributeMUSE tribute/Cargo Bar Moscow

Duration : 0:5:56

Read on »

Technorati Tags: ,

0 Q straints: Why QStraint Wheelchair Tie Down Straps are the BestInstructional on how to use Q-straint wheelchair straps as opposed to Tiedowns to secure a wheelchair in an AMS handicapped van. Qstraints are the best for wheelchair safety. http://www.amsvans.com/Equipment/Q-Straint-Adjustable-Straps-for-Wheelchairs

Duration : 0:2:31

Read on »

Technorati Tags: , , , , , , , , , , , , , ,

0 How to Install your Cargo CablesShort video showing the quick steps to install your set of Cargo Cables in your pickup truck

Duration : 0:2:34

Read on »

Technorati Tags: , , ,

I have been looking for a bike rack for my 1997 Pontiac Sunfire (coupe). Unfortunately I haven’t had much luck finding anything, due to the spoiler and the lack of Cargo Bars on my car. I can’t even fit a bike in the car so please don’t suggest that:p

The only rack that I found that would fit my Miata and RX8 with a wing spoiler is a Saris Bones 2.

http://www.amazon.com/s/?ie=UTF8&keywords=saris+bones+2&tag=yahhyd-20&index=aps&hvadid=18313892011&ref=pd_sl_7ilqwxic07_b

I have seen the e-track system and it is not what we are looking for

try "L" track and tiedowns